[求助]求CODEV中MTF圖線不能顯示的原因 [復制鏈接]

小弟用CODEV設計了一個開普勒望遠鏡。目鏡用的是對稱式，物鏡用了一個雙膠合，視覺放大率為12。 iOjmj0  
在目鏡和物鏡分別優化之后，將二者組合在一起時發現Quick 2D能正常顯示，但是MTF圖線無法顯示，有報錯，如下： M={k4r_t  
Warning: At least 3 focal positions are recommended for finding best focus An/)|B4  
Warning: This system is not isoplanatic at field(s)  1, 2, 3, 4. +]5JXt^  
               Any MTF results are of questionable value for assessing XImb"7|  
               the image quality, except in those cases where the user is lYQcQ*-  
               interested only in the image of a point-like object.  The ={#r/x  
               image quality for the unacceptable fields varies significan- n+Fl|4  
               tly over a lateral region of 12 Airy disk diameters. o] )qv~o)  
Warning: The MTF results at one or more fields are inaccurate. `S$BBF;  
               The mapping between entrance pupil coordinates and exit pupil coordinates uh
:  
               is nonlinear.  The nature of the nonlinearity is such that Code V is not R^%7|  
               able to compute an accurate MTF result.  Usually, this condition is *(D_g!a  
               caused by severe pupil distortion or some discontinuity in the pupil k9yA#
 
               coordinate mapping.  In all cases where the pupil coordinate mapping {{@3r5KGl  
               has sufficient nonlinearity to cause this warning, the imagery is extremely D?X97jNm  
               nonstationary (non-isoplanatic) and small changes in object space 5:^dyF&sm{  
               coordinates will cause large changes in the image of a point source. K V 4>(  
Error: The problem described here occurs at the following field(s): :rk]o*  
                           Field:  1 q SCt=eQ  
                           Field:  2 "b-6kM  
                           Field:  3 R6{%o:{  
                           Field:  4 - bFz  
     ERROR - For  field  4, wavelength  1, rays at the edge of the pupil A g
/z\kX  
             may be ignored. Check apertures and vignetting for consistency. EG<K[t  
這個究竟是什么問題呢？好像是和視場有關。求高人指點。

1、是無焦模式嗎？ )1H]a'j  
2、MTF最大設置成多少了？一般無焦的到2已經很NB了。具體不講了，多看看CODE V相關的資料

我是初學，把鏡頭數據輸入后，得到的結果和樓主一樣，無法做出mtf。

望遠鏡設計是要無焦的吧?MTF設置了40,但是物鏡和目鏡分別優化時都是沒問題的啊

設置成無焦模式后，把mtf的最大值改成1，具體原因求哥們好好學習，個人能力有限，怕解釋不清楚

多謝指點，雖然不知道為什么，但是圖線出來了。

非常好的，謝謝

學習 學習！

系統沒有銜接好，看看na epd等

codev初學，學習了