[求助]codev如何實現zemax的ray aiming功能？ [復制鏈接]

zemax里有ray aiming來實現光瞳誤差調整，但是轉換到codev后明顯光闌處各視場不重合，如何調整，有沒有對應的功能

自己頂一下

codev里有光闌調整，讓他自動調整就行了嗎，但是鏡頭圖里還是光闌處有像差啊，

是通過設置漸暈嗎，

有沒有圖啊，照你的描述，應該是設置漸暈

使用說明書Chapter 2 page 26 'rgV]Oy  
The chief ray (or principal ray) from every field point will be iterated to pass G})mw  
through the center (x=0, y=0) of the stop surface, unless you override this behavior U
gJHSl  
with chief ray aiming (this is only necessary in a few unusual situations).

kimclps:使用說明書Chapter 2 page 26 lZ|
Ao0(  
The chief ray (or principal ray) from every field point will be iterated to pass !dGgLU_  
through the center (x=0, y=0) of the stop surface, unless you override this behavior W$&Q.Z  
with chief ray aiming (this is only necessary in a few unusual sit .. (2016-10-10 14:44)  0t~--/lA  

$T6<9cB@  
對于廣角，光闌中置的系統，Rayaiming 是如何設置的？設漸暈的話邊緣視場很容易計算錯誤，出現光線散掉的情況

廣角不是在System Data 里開個Wide Angle Mode就行了么。畢竟幾何光學公式在廣角里有限制。