[求助]是不是兩個面接觸就要?jiǎng)h掉一個面？ [復制鏈接]

就是我的模型光線追跡出現很多這樣的錯誤 6/[Z178m  
Error: N GaN and 藍寶石 are overlapping at coincident surfaces Surface 30 and Surface 30. oF;%^XFp  
   Ray 5115, level 18 terminated at (-0.119454 -0.117741 0.174099) ," C[Qg(  
Error: N GaN and 有源層 are overlapping at coincident surfaces Surface 842 and Surface 1. 7bonOt Y  
   Ray 5607, level 21 terminated at (0.0188833 -0.127338 0.183) ^$=tcoQG  
Error: N GaN and 有源層 are overlapping at coincident surfaces Surface 842 and Surface 1. #5y9L  
   Ray 7653, level 207 terminated at (0.093282 0.140421 0.183) uS,p|}Q&  
Error: N GaN and 有源層 are overlapping at coincident surfaces Surface 842 and Surface 1. /i{tS`[F2a  
   Ray 8336, level 89 terminated at (-0.147892 0.0395662 0.183) `y^zM/Ib  
Error: N GaN and 有源層 are overlapping at coincident surfaces Surface 842 and Surface 1. >,>;)B@J  
   Ray 9417, level 24 terminated at (-0.0549373 -0.0470588 0.183) Gpdv]SON{  
有網友說是兩個物體相交面重疊的問題，那么應該怎么處理呢，是不是將一個表明刪除。 c{
mK
ra  
謝謝

你沒有辦法刪除一個表面，如果你不是指表面屬性的話 5c:'>  
我的辦法是復制其中一個然后讓他們相減構造一個緊貼的表面，這樣比直接靠在一起出現錯誤光線的機會小很多 zBk_-'z  
其實我的意見還是，少量出現這樣的光線不影響最后結果

Coincident Surfaces t|;%DA)fjw  
TracePro models often incorporate geometry with coincident surfaces. Thisoccurs for such systems where two objects have one common side, e.g., acemented doublet. This section describes the behavior of TracePro with respectto Surface Properties applied to those coincident surfaces. The tree cases are: [AXsnpa/C  
1.No Surface Property (i.e., <None>) applied to either coincident surface - TracePro will calculate the reflectance and transmittance at this interface based on the Index of Refraction specified in the Material Properties for the two objects (the Fresnel reflection and transmission coefficients). Z0e-W:&;kF  
2.Surface Property applied to one coincident surface only while the other surface has the Surface Propery of <None> - TracePro will use the parameters of the single defined surface property to determine the flux and direction of the resulting rays. H
Uj+-  
3.Surface Properties applied to both coincident surfaces - Although this condition is somewhat nonsensical and is not recommended, TracePro will combine the two surface properties in accordance with the equations below: 94Xjz(  
抱歉公式打不出來 2Sge  
where R1, T1, and A1 are the reflectance, transmittance, and absorptance,respectively, of the first coincident surface; R2, T2, and A2 are the reflectance,transmittance, and absorptance, respectively, of the second coincident surface;and Rc, Tc, and Ac are the reflectance, transmittance, and absorptance,respectively, of the resulting combined property. f%2%T'Q  
Note that other surface properties, such as the BSDF (BRDF or BTDF) are foundin an analogous method.

謝謝，只是有錯看起來不舒服，呵呵

樓主是不是在模擬LED芯片結構，我也遇到同樣的問題，不知道怎么解決～

同志 4bnt=5]  
呵呵